Bosch Video Management System is a unique security solution for enterprise IP Video, which can provide seamless digital Video, audio and data Management across any IP network. It provides the best VMS to complement Bosch CCTV equipment to take full advantage of the unique capabilities of Bosch camera and video solutions. It also provides interfaces and standards for integrating other systems and manufacturers. The system has unique embedded recovery capability. The system can keep operating and running even if both the management server and the video server fail at the same time. Advanced intelligent video analysis and unmatched video technology, can use a single server management as many as 2000 cameras (including as many as 500 ONVIF taken as machine), which significantly reduces the total cost of ownership. Bosch Video Management System provides a very flexible System setup. Only this system supports Bosch VMS-BIS Connectivity. • Enterprise System: multi-management Server requirements that support subways, airports and other large industrial facilities across different time zones. Support controllable monitoring across different legal entities. Each user group can monitor up to 10,000 cameras in 10 sub-systems, allowing a total of 200,000 cameras to be monitored. Each user group has as many as 30 subsystems, each subsystem is equipped with cameras is less than 100 units, allowing each operator at the same time by up to 30 Management Server computer access events, alarm, live and put back. , per Management Server 500 ONVIF cameras, using Bosch DVR recorders DIVAR IP 3000/7000 and individual Management Server computer to access live (including PTZ control and as many as 9999 sites recorded Video) Bosch Video Management System installed on the Microsoft Windows operating System. We recommend Bosch workstations and servers. They have been thoroughly tested and optimized and are very suitable for running Bosch Video Management System. In addition to Bosch ST standard sales terms and conditions, the Bosch software maintenance agreement is the best way to keep your VMS up to date. You can find Bosch software maintenance protocol in the product catalog. · Management Server software provides Management, monitoring and control of the entire system. A Management Server can manage up to 2000 cameras/encoders. · Video Recording Manager (VRM) provides Video and playback Management of Video, audio and data. A VRM can manage up to 2000 cameras/encoders (including up to 500 ONVIF cameras). • the Configuration Client software provides a concise user interface for system Configuration and management. • when using Bosch VMS devices, the Config Wizard software provides convenient and fast Settings for small video systems. • Bosch VMS: DIVAR IP 3000/7000 is a simple and reliable integrated video, viewing and management solution for network monitoring systems with 32 pre-licensed channels. • Operator Client software provides an intuitive user interface in line with ergonomics for system monitoring and operation. • Mobile Video Service, providing transcoding Service. It transcodes live and recorded video streams from the configured camera based on available network bandwidth. This service enables video clients to view high-quality images over low bandwidth. • mobile applications (iPhone or iPad) : remote access to live video and playback video from a single or four-screen view. Simply click to alert other security personnel and share video with them. Applications provided in the AppStore. • Web client: remote access to live video and playback video from a single or four-screen view. Search for text data on Management Server and trigger video export. • Bosch Video Streaming Gateway: Bosch camera, ONVIF camera, JPEG camera and RTSP encoder. Bosch Video Recording Manager (VRM) provides distributed VCRS solutions, so no dedicated NVR is required. The use of multiple clients working provides excellent scalability. · offline clients will ensure that live, playback, and export operations continue in the event of a Management Server connection break. Video Recording Manager (VRM) VRM provides load balancing and failover capabilities for iSCSI storage systems, and more iSCSI storage systems can be easily added in the future. VRM introduces the concept of a storage virtual layer. This abstraction layer enables VRM to manage all independent disk arrays throughout the system as different "virtual" storage pools that can be intelligently allocated as needed. A storage pool is a container for one or more iSCSI storage systems that share the same load balancing attributes. Dual/failover video: • the main VRM manages the normal video of your system's cameras. The dual video recording of the camera can be realized by using auxiliary VRM. Dual recording allows you to record video data from the same camera to different regions. An auxiliary VRM can manage the auxiliary videos of multiple primary VRM. A failover VRM can be used to continue recording a failed primary VRM or a malfunctioning secondary VRM computer. In addition, Bosch VMS support live and playback of the following recording engines: • DIVAR IP series, local storage, direct iSCSI video; Bosch Recording Station and Video Streaming Gateway (VSG). For compatibility with older systems, the following recording engines are supported: DVR, DiBos, VIDOS (live only). Camera • supports Bosch UHD and panoramic cameras, mpeg-4 and h.264 coders, mpeg-4 and h.264 IP cameras and IP AutoDome cameras (in both standard and high definition formats) • supports high resolution: 720 p and 1080 p, 5 million, 800 and 800 pixels (IVA), Intelligent video analysis and forensic search, fire detection based on video, automatic network compensation (ANR), a sensitive area (ROI), Intelligent Tracking (Intelligent Tracking), according to the quality of each camera debug Settings. For more information, see the camera data sheet. · support third party camera through RTSP, JPEG or ONVIF Profile S. A list of supported third party cameras is posted on the Bosch integration partners project website. Update of deployment • Operator Client and Configuration Client can be automatically deployed from Management Server • one-click patch deployment • new Settings: The Internet Information Service will be configured automatically for use with the Mobile Video Service, and the user will simply enter the number of desired VSG instances and then perform the update installation with a few clicks. Configuration • regular cameras connected to Bosch VMS will check the value of the current known function when connecting to the unknown Bosch IP camera/encoder. Therefore, the new Bosch VMS version can be connected to a new type of camera in the future without upgrading to the new Bosch VMS version. Valid for firmware 5.70 or later • automatic scanning of IP devices • automatic allocation of IP addresses for IP devices • configurable logical trees • device status represented by ICONS, Including the network connection interruption, loss of video and camera adjustment error, perform batch firmware update schedule for IP devices, up to 10 contains the holiday schedule and the exception, videos, support holiday, exceptions, and cyclic schedule task schedule, according to the camera Settings respectively the shortest and longest video time, according to the live video cameras and video timetable set respectively, conventional video, mobile video and alarm video frame rate and quality of processing, composite events (events combined with Boolean logic expressions) Event replication allows for individual treatment, user group event distribution, based on the schedule of the event log, based on the schedule of events trigger command script calls, four configurable user events (which can be triggered by the menu command), the ONVIF mapping to Bosch VMS events. The ONVIF event can then trigger a Bosch VMS alarm and video recording. Alarm configuration • alarm generation based on schedule • alarm can trigger any camera alarm mode recording. • 100 alarm priority levels can be defined. • the appearance of text data can trigger alarm recording. Sequence • pre-configured camera sequence with 25 cameras, each up to 100 steps long, with a separate dwell time. • by selecting multiple options and dragging and dropping them into the automatic ordering columns created in the image pane. User management, compatible with LDAP, with Microsoft Active Directory user management system integration, such as access according to user group separate management system resources, according to the user group of custom logic tree - the user will only see their access to equipment, used to protect, delete, export and print video user group permissions, used to access the log of the user group permissions, user group assigned yuntai control priority and Allegiant camera access priority