Can operate various Bosch PTZ cameras, such as MIC7000 u two-way audio; Alarm/washer control connection; One (1) local storage slot for CompactFlash (CF) memory card; A 1 hd BaseT boai hospital is designed for an RJ45 Ethernet port. Two RJ45 ports; (2) for use with based on the SFP optical fiber mold piece of multiple cameras in the slot u Daisy chain support equipment VIDEOJET connect 7000 (VJC - 7000-90) is a fully functional network power supply device, the device can operate all kinds of Bosch PTZ camera, such as MIC7000. One (1) the device including a HPoE network connections, (2) two network interfaces by the standards of the IP to connect to other devices, one (1) suitable for optional CompactFlash (CF) of the memory card slot, and two (2) for use with based on the SFP optical fiber module slot, alarm/cleaners and audio I/O control interface * *. * note: this feature only works for MIC7000 cameras "tied" to camera 1. The system overview notes that for full functionality, the MIC7000 camera connected to VIDEOJET connect 7000 requires a 5.93 or higher version of the firmware. From the following website to download firmware: https://downloadstore.boschsecurity.com. Note: to reach a distance of 100 m (328 ft) using the Cat5e/Cat6e cable, Bosch recommends a cable with a minimum power rating of 350 MHz. The certificate and the approved electromagnetic compatibility (EMC) meet the requirements of FCC part 15, ICES 003 and CE regulations. Including the latest versions of EN 50130-4, EN 55022:2006 inc.al :2007, EN 61000-3-3, EN 61000-6-1 and EN 61000-6-2 products are in safe compliance with UL, CE, CSA, EN and IEC standards 60950-1 and 60950-22 waterproof and dustproof grade/standard IP66, IP67, NEMA type 4