The plm-wcp belle matrix wall control panel is the attachment of the plm-8m8-channel DSP matrix mixer. As with any good accessory, it adopts complementary aesthetic design, not only with exquisite appearance and smooth design, but also with practical products. Easy installation; PLM ‑ eight m8 by standard CAT 5 cable power supply, the device via RS485 communication, this means that it can be Daisy chain mode to multiple PLM ‑ WCP and PLM ‑ area on the 8th of cs call standing together, thus reduce the cable laying path and installation time. The control on the basic function controller and indicator device are capacitive touch control, and the LED indicator light shows white, bringing concise appearance and feeling to the device. Switch between four possible options by selecting the select button. There are two configurations, the DIP switch on the back of the device can be set during installation so that the corresponding area can be played: A) 4 channels of microphone/line input so that each channel can be mixed separately in the area; Or B) three separate music sources that can be turned on and off. It is easy to label the device. Just use the PC GUI software to print the TAB. The label also includes white text on a black background to keep the device beautiful. The certificate and the approved safety comply with EN 60065 standard EMC radiation comply with EN 55103-1 standard EMC disturbance rejection comply with EN 55103-2 standard area certification Europe CE installation/configuration loop. You can connect PLM‑WCP and PLM‑8CS area 8 call stations in tandem (Daisy chain), reducing the number of cable laying paths required for installation. The plm-8-channel DSP matrix mixer is powered by the same CAT 5 cable for these devices. Mounting bracket the device is specially designed for surface mounting and is attached to a wall mounting bracket to attach the device to the bracket. There are three cable entry options on the device to make installation as simple as possible.